How To Add A Hand-held Garage Door Remote Control?

- Jul 01, 2020-

Press and release the LEARN button on the overhead garage door opener unit. The learn indicator light will glow steadily for 30 seconds. Within this 30 second time period, press and hold the button on the hand-held remote. Next, release the button when the overhead opener unit’s lights blink. If light bulbs are not installed on your opener, then two clicks will be heard.

To erase all codes from motor unit memory:
Press and hold the LEARN button on motor unit until the learn indicator light goes out (approximately 6 seconds). All previous codes are now erased. Reprogram each remote or keyless entry you wish to use. Press and hold the ENTER button. Next, release the button when the overhead opener unit’s lights blink. If light bulbs are not installed on your opener, then two clicks will be heard.

JH-KIT03









How do I program my remote control with with wifi receiver ?

Please follow the following steps: 

First you need find our app Idoor from your google play or apple app store and download the app,install and register with your mobile phone.

Then you can use your mobile phone to connect our wifi receiver by wifi ,ap network ,then you can control your receiver by your mobile phone.You can also share the device with your families and they can also control the receiver by their mobile phone.

0