Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
For all kinds of suitable remote controls.
Learning keys and LEDs: There are two in-dependent channels. Each channel has in-dependent learning keys s1, s2 and l1, l2.
Power input switch: This receiver can be operated with 12 to 30 V AC/DC. However, it is best to change according to the energy intake.
If the input voltage is greater than 24 V, if it is less than 24 V, shorten pins 2 & 3; 1 & 2.
The smallest size can be used for 400 yards.
Other remote controls and receivers and 2 in-dependent relays are undisturbed
Program the remote steps:
Step 1. First select the correct brand for the remote control to be entered (via the DIP switch).
Step 2. Press the learning button 1 or 2 and the corresponding LED lights up.
Step 3. Press the button on the remote control. LED 1 or LED 2 flashes four times. The remote control key has been successfully learned.
How to remove the code:
Press and hold one of the learning keys. The LED starts to flash. Press and hold this button until the LED goes out. All data stored on the memory card will be permanently deleted and cannot be restored.
