Universal Remote Controller

Universal Remote Controller

Model NO.:JH-KIT03 Voltage:AC/DC 9-24V Product Name:Remote Controller Frequency:433.92/315MHz Relay:2 Relay Operation Mode:Momentary/ Self-Lock Transport Package:White Box, Color Box, Display Box Specification:62*58*32mm
Chat Now

Product Details

Universal Remote Controller Product Description

User manual:
This receiver is designed to control any gate automation system, burglar alarm system, electric doors, windows, lifting equipment,
gateways, lifting devices. This is an easy to use, good looking, low power consumption and is easy to connect to your existing system.
This receiver can store up to 150 remote controls.
It can be learned with our 433,92MHz.fixed and rolling code remotes
Technical Parameters9-24 Vac/Vdc
Power Supply 433.92 MHz or 315 MHz
Max Consumption200 mA
No. of Max Codes 150
No. of Channels2
No. of Outputs NO / NC 2
Max Switching Power0.5 A / 120 VA
Operating Temperature'-20/ + 50 oC
Working Distance 70--100 m
Relay Spec. 10A 277VAC  12A 125VAC
How to add a new remote and choose between momentary & latch mode:
There are two learning buttons beside the connector, shown as P1 & P2
Press P1(Learning Button 1):
Press "P1" (learning button 1) - Learn LED will go on. Then press the button which you wish to learn on your remote control. Learn LED will start blinking 2 or 3times and on - This means that you have successfully learned your remote to the receiver.
1. Press P1 once to program R1 in Momentary mode. 
2. Press P1 twice to program R2 in Momentary mode
3. Press P1 3 times to program R1 in Latched mode
4. Press P1 4 times to program R2 in Latched mode
For example: 
Press P1 once and press the button you want to learn on your remote, push button A, it means button A will control R1 in momentary mode. You can see the LED working light besides R1 will comes on during you holding on button A. Release button A, R1 off, as well as the LED working light go off.  If Press P1 3 times, push button A, it means button A will control R1 in latched mode.
If you use a 4 button remotes A,B,C,D. you can use button A control R1 in momentary mode, and button B cofnrol R2 in momentary mode, and button C control R1 in latch mode,  and button D confrol R2 in latch mode.
Note: press and hold the key on the control until the LED begins to flash.
Repeat the above steps for other transmitters.
How to erasing the existing code
Press P2(Learning button 2) until the Learn LED comes on (approx. 8 seconds).
Press P2 and keep holding until Learn LED comes on ( push approx. 8 seconds), then release P2, 
Once Learn LED is on, it means that you have successfully erased all the codes of your remote.
How to connect
All you need to do is to connect this receiver to your control board by using only 4 wires ( 2 - for power; 2 - for relay!!!)
Note: The abriviations of your board can be different, so follow your manual.
With the 4 channel remote controls you can operate up to 4 absolutelly different systems !
In order to use 1 remote for up to 4 different systems, you will require to purchse additional receiver(s).
Our main products:
We mainly products wireless remote control,remote duplicator,wireless module,tubular motor controller system, shutter door remote control
system,barrier control system,electronic curtains remote control system, adjustable-speed fan remote control system,LED light remote
control systemand other types of remote control products.

Hot Tags: Universal Remote Controller, manufacturers, suppliers, factory, customized, cheap, quotation, low price, free sample, Rolling Code Remote Control, Garage Door Fob, Remote Control For Garage Door, 868mhz Sliding Door Remote Control, Fixed Code Remote Control, Sliding Door Motor Remote Control


You Might Also Like